We distribute an extensive selection of CATERPILLAR FORKLIFT FORKS parts for all makes and models. We ship directly from various warehouses located all over North America to provide the fastest shipping at the most affordable prices.
A Forklift Fork of a forklift vehicle is a structural component that serves the lifting surface. Highest grade metals are used to make these forks. These components are tied to a mast. This mast holds the fork at the suitable levels with its rollers. A control module in the cab is also used by the operators to control them.
Different sized forklift forks are available in the market. Their sizes are classified as class 2, 3 and 4. The distance from the bottom of the upper hanger to the top of the lower hanger at the carriage is the size of the forks. This distance for class 2 is measured 16 inches, where for class 3 it is 20 inches and for class 4 it is 25 inches.
Fork length is the measurement from the end tip to the face, whereas, fork width refers to the distance from side edge to the other side edge of an arm. Fork Thickness is also an important for us to know which refers to the distance from the top to the bottom of the fork arm. The Load capacity of a forklift is found in the data tag.
Forklift forks can last for quite a long term if it is used carefully. Due to heavy use and some misuses, the service life comes to an end very quickly.
Solid Lift Parts Inc. is one of the most prominent providers of various caterpillar forklift forks. Whenever you need a new fork, just order us and you will get your required fork within a short period.
Caterpillar Forklift Forks Photos
*Manuals and parts books are not owned by Solid Lift Parts inc. and are presented for reference purpose only.